| BENDIX ACom 6.3 TM Diagnostics Software for ABS |
| Operating Systems |
- Windows 98
- Windows NT
- Windows 2000
- Windows XP
- Windows Vista
- Windows OS are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
|
| Disclaimers |
| This guide, as well as the software described in it, is furnished under license, and may only be used or copied in accordance with the terms of the license. - The information provided in this manual is for informational purposes only and is subject to change without notice and should not be construed as a commitment by Bendix Commercial Vehicle Systems LLC Bendix”).
- Bendix assumes no responsibility or liability for any errors or inaccuracies that may appear in this publication.
- General Information ACom™ diagnostics will provide the user with the capability to view and repair ABS component diagnostic trouble codes, monitor wheel speeds, display and edit configuration of ABS ECU, selfconfigure ABS ECU, and test ABS components.
|
| This application will support the Bendix |
- ® EC-60TM
- Bendix ® EC-17 TM
- Bendix ® EC-30 TM
- Gen 4 TM
- Gen 5 TM (U12 and U16), ABS 2X, Bendix ® TABS 6 TM
- Bendix ® EC-30 T TM and A-18 TM ABS ECUs.
|
| A list of the recommended RP1210A adapters as shown below |
- The following are a list of supported hardware adapters for the software. Verify that the driver (.dll) for the adapter to be used for communications is loaded on the computer.
- Nexiq– Parallel Data Module (PDM) /USB Adapter Parallel Data Module(PDM)
- Nexiq– USB Link (USB)
- Nexiq – Wireless Vehicle Link (WVL)
- Nexiq – Heavy Duty Standard Lite Link
- Noregon – PLC-1708 Adapter
- Noregon- Data Link Adapter (DLA/ USB)
- Dearborn – Adapter II, III, DPA 4 USB
- Bendix – Brake Link Adapter
- IC3Com Interface
- IC4Com USB Interface
- EZTech Link (Wireless)
- Eaton – MD 100
- Known Issues with RP1210 adapters: Tool does not support two adapters connected at the same time.
- Noregon PLC - 1708 Adapter does not support USB connection.
|
| PC hardware requirements |
- Intel Pentium II processor or compatible, 450 MHz
- 64 MB RAM
- 300 MB free disk space
- Microsoft Internet Explorer Version 4.1(current version will be part of distribution CD)
- Adobe Acrobat Version 4.0 (current version will be part of distribution CD)
- Communication port
- VGA standard graphics adapter, 800 x 600 resolution (1024 x 768 primary usage)
- Window compatible keyboard and mouseNOTE: Tool is not guaranteed to operate correctly on 95 operating systems.
|
| Known Issues with ACom™ Operation |
- Hot keys do not work with program.
- Older models of the EC-30T may not support scratch pad. If user is in the installation test at the
scratch pad step the program may freeze. NOTE: Stand alone scratch pad works fi ne. - TABS-6 event history may take two clear commands to actually clear the history.
- Extreme graphics causes the right side and bottom of some screens to be cut off. Please
change graphics back to small or 96dpi. - EC-17/30 with an event history wrap around will display Data read in progress forever.
- ACom will not run on Windows 95.
- Registry is not completely removed during uninstall.
|
| ACom-User-Guide.pdf |
| ElectronicControlsBrochure.pdf |
